How do I configure remote syslog logging for a Cisco IOS device

This article will walk through the steps to configure Cisco IOS devices to send syslog messages to the RocketAgent Syslog Server

To send syslog messages from Cisco IOS-based devices, connect to the device via SSH or telnet and run enable to become administrator.

Enter the following commands:

configure terminal
logging host <ip_address> transport udp port 514
logging facility syslog
logging trap debugging
write memory

Replace <ip_address> with the IP address of the RocketAgent Syslog Server

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Contact us